Install Sprint Visual Voicemail on a Custom ROM

If you've recently installed a custom ROM like CyanogenMOD, you may be missing your Sprint Visual Voicemail app. Getting Sprint Visual Voicemail back is actually pretty easy!

What you'll need:

1) ASTRO File manager (easily downloaded and installed from the Android Market) on your phone
2) The Sprint Visual Voicemail apk

How to:

Step 1) Place the Sprint_VVM.apk in a folder on your phone's sdcard (../downolads is as good a place as any).

Step 2) Launch the ASTRO app and navigate to the Sprint_VVM.apk and tap it.

Step 3) You should be prompted to install it (you might be prompted to allow apps from sources other than the Android Market: you should approve this).

You're done. I noticed that all of the voicemails I've ever received started showing up. Just let them all compile and then delete them all and you're ready to rock.

And that's how you install Sprint Visual Voicemail on a custom ROM

Verizon Radio on HTC Hero for Sprint?

Have you ever considered switching to Verizon because your Sprint signal is no good? Won't make the switch because of the price? I don't blame you. Sprint has, hands down, the best data packages available for the price. Nothing even comes close.

Wish you could have Verizon coverage for Sprint prices? You can!

Can you hear me now?
Just like you don't need an Evo, or a Droid X, you don't need Verizon to get the best most out of an Android 2.2 phone. Let's flash a Verizon Radio onto our HTC Hero for Sprint!

WARNING: Everything posted on this blog has been tested and confirmed. That being said, if you brick your device, it's no one's fault but yours. No one is making you do any of this. Messing with Radios has, probably, the most bricking potential of anything you'll run into on this or other pages.

What you'll need:
1) Rooted HTC Hero for Sprint (CDMA HERO). Not Rooted? Everything you need to Root your HTC Hero for Sprint is over on the right in this blog's Archive. Start in August, 2010.
2) The Verizon Radio (Compliments to flipz at Geek For Me)
3) Some guts.

How to:
Step 1) Drop the Verizon Radio (zipped file) onto your sdcard's root directory (i.e. not in any folders). Like custom ROM's, Do Not Extract.

Step 2) Boot into your recovery image (i.e. boot into Nandroid, Clockwork recovery, etc.)

Step 3) Select - Apply sdcard:choose zip or Flash Zip from sdcard (depending on your recovery image) and then choose the Verizon Radio that you placed on your sdcard. Press HOME to confirm that you'd like to install it. The installer should walk you through the flashing of the new radio.

Step 4) Once the new radio is installed, you'll be back at the Nandroid Menu and it might say that it is clearing "cache..." Just wait a minute and then go ahead and - Reboot system now

That's it. You've got the Verizon radio on your HTC Hero for Sprint.

Android 2.2 (Froyo) on the HTC Hero (CyanogenMod)

Sprint made it clear awhile back that the CDMA Hero would not support Android 2.2 (aka Froyo) while all of their other Android phones would. Why did Sprint decide to give up on the Hero? There's not a good answer to that question. A lot of folks in the development community claim it's because they want people to buy Evo (or some other 4g phone) and pay the $10/month "cool" tax. Whatever the reason may be, it's not stopping us from putting Android 2.2 on our HTC Hero.

So far, there has been no success in porting an Android 2.2 ROM with the HTC Sense UI, so if you were hoping to keep Sense then you're out of luck (for now). There has been success, however, in porting Android 2.2 and there are a number of themes out there that are just as convenient as Sense (though they don't have the Sense widgets or apps). Consider "Launcher Pro" if you need a "Sense-like" UI.

All that being said, let's get down to the task of getting Android 2.2 on our Rooted HTC Hero for Sprint.

What you'll need:

1) Rooted HTC Hero for Sprint: Option 1 or Option 2
2) Nandroid Backup Installed
3) Cyanogen's Mod (Android 2.2)
4) The Google Apps Addon pack (big thanks to Cyanogen and his people for making this possible)
5) The newest Sprint Radio

Alright, here we go:

Step 1) Place Cyanogen's Mod, Google Apps Addon, and the newest Sprint Radio on your phone's sdcard in the root directory (i.e. in the first level of your sdcard [not inside any folders]). Do not extract any of these files.

Step 2) Boot your phone into Nandroid using your method of choice.

Step 3) Make a backup of your phone's current state.

Step 4) Do a WIPE of your phone (- Wipe data/factory reset)

Step 5) Select - Apply sdcard:choose zip and then choose Cyanogen's Mod and press HOME to confirm that you'd like to install it.

Once the MOD is installed, you will be returned to the Nandroid Menu. Before rebooting your phone and having fun with Android 2.2, you'll want to install the Google Apps Addon you downloaded.

Step 6) Select - Apply sdcard:choose zip and then choose the Google Apps Addon and press HOME to confirm that you'd like to install it.

Once the Apps are installed, you will, once again, be returned to the Nandroid Menu. Before rebooting your phone, you also want to upgrade your radio (OPTIONAL).

OPTIONAL Step 7) Select - Apply sdcard:choose zip and then choose the new Sprint Radio and press HOME to confirm that you'd like to install it. The installer should walk you through the flashing of the new radio.

Once the new radio is installed, you'll be back at the Nandroid Menu and it might say that it is clearing "cache..." Just wait a minute and then go ahead and - Reboot system now

Your phone will reboot. You'll see the HTC splash screen (it may appear to hang on the HTC screen but don't worry). Next you'll see the Cyanogen splash screen. It WILL hang here for quite some time (on the first boot). Just be patient, your phone is just getting it's "first time" configuration. It may got back to the HTC splash screen and then back to the Cyanogen splash. This is all normal.

Eventually, you'll end up in your new Android 2.2 HTC Hero and you will be happy.


NOTE: this ROM works best after several restarts, so once you get your phone set up after the initial install, go ahead and reboot it once or twice.

And there you have it: Android 2.2 on your HTC Hero for Sprint. Take that Sprint.

Quick Review (9/17/2010): I've been running CyanogenMod on my phone now for 2 weeks and am nothing but pleased with its performance. It's very fast (faster than Zen Aria) and very stable. There are a few features that don't work all the time and the camera is still a little buggy but I don't use my HERO for a camera very often. The battery life seems a little better than the stock OS and a little better than ROMs running the Sense UI. Overall, this is a massive improvement on the stock HERO and with nightly updates, it's over-the-top. If there is one drawback, it would have to be that there is no Visual Voicemail.

Bottom Line: oh yeah, you want it.

RUMOR: There are folks in the development community who say that Sprint will be releasing an update to the HTC Hero in October 2010. Some think that this update will be Android 2.2 others do not think so. Sprint has been pretty clear about not wishing to load Android 2.2 but then again it's pretty clear that people are upset about this and it wouldn't be the first time the Sprint admitted a mistake. We'll see.

Installing a Custom Rom: Zen Aria Alpha 5

Now that we know how to use Nandroid to make backups and run system restores, it's time to take a look at installing a custom ROM.
What is a custom ROM? The best way to think of a custom ROM is to think of it as a new operating system for your android phone. Some are faster than others. Some offer more features that others. But for the most part, all of the custom ROM's out there in the development community are superior to the stock ROM that came loaded on your HTC Hero for Sprint.

So, what we want to do is load a custom ROM.

The first step in loading a custom ROM is choosing the ROM you want to load. For this tutorial, we are going to use the Zen Aria ROM.
Step 1: download the ROM. The Zen Aria ROM that we'll be using in this tutorial is available here.

Step 2: place the ROM in on your phone's sdcard in the root directory (that's the main folder [i.e. not inside some other folder]).

Step 3: boot into Nandroid using your method of choice and make a backup of your currant system. Once your backup is complete, move on to Step 4.

Step 4: for most ROMs, at this point you will want to WIPE your phone by selecting - Wipe data/factory reset, however the Zen-Aria ROM that we are installing will go ahead and do this for us during install, so we can just skip this step and move right along to Step 5.
Step 5: once your backup is finished, select - Apply sdcard:choose zip from the Nandroid menu.

You will get a list of the ROM's that are on your sdcard.

Step 6: select Zen-Aria_Alpha5-D-signed.zip

You will be prompted to install this ROM and you should accept the prompt using the HOME key.

The ROM will self install from this point and will then land you, once again in the Nandroid main menu.
Step 7: select - Reboot system now

The first system reboot on the Zen Aria ROM is painfully slow. It can take up to 10 min for it to complete. Just wait it out. It may appear to be hung on the HTC screen; never fear, it will move along and finish up beautifully.

Quick Review of Zen Aria.


This ROM is incredibly fast. If you are mirgrating to it from a stock HTC Hero for Sprint, you will be shocked by how smooth this ROM is. There is virtually no sluggishness. As you can see, it is build on the Sense UI which I was a little worried about at first (not being a big fan of sense) but I prefer the styling on this quite a bit and, again, it's way zippier than the stock sense UI. I just installed it on my phone 30min ago, so I'm not sure how hard it is on the battery. I know that it overclocks the phone's CPU slightly so that might have some kind of effect, though, from what I can tell, the development community is absolutely swooning over this build. I'm looking forward to running this for a few days at least and may make a more permanent switch.

Bottom Line: Even with the Sense UI, this ROM is a Ferrari and stable enough for everyday use.

UPDATE (Sept. 3, 2010): The one drawback that I've noticed with this ROM is that on restart, the HTC screen will really hang for a long time. Sometimes it hangs for up to half an hour which is, in my opinion, unacceptable. I'm sure this will be fixed in the next update. I'm told that the hang time is due to sense UI having difficulty loading.

Making a Nandroid Backup

Now that our phones are rooted and we have Nandroid available on our phone, we should probably think about doing a backup of our current system. Making a Nandroid backup is simple but could save you when working with custom ROMs.

First, we'll need to enter the Nandroid interface and there are 2 ways to do this.

Option 1: from the command line.

Step 1: plug your phone into your computer using a USB cable and set the phone to "Charge Only". Also, make sure that you have USB debugging active (Home-> Menu-> Settings-> Applications -> Development-> USB debugging).

Step 2: open a command prompt on your computer and change directories to your android SDK tools folder: cd C:\...\android-sdk-windows\tools
and hit Enter

Step 3: launch the shell: adb shell
and hit Enter

NOTE: At this point your command prompt might display:

adb server is out of date. killing...
*daemon started successfully*
#

If it does, skip to Step 5. Otherwise, move on to Step 4

Step 4: switch to root users: su
and hit Enter

You should see a # at this point

Step 5: now we want to boot our phone into the Nandroid interface. From the command line enter the following command: reboot restore
and hit Enter

At this point your phone should begin to reboot and you will land in the Nandroid interface.

Option 2: manual landing.

Step 1: power off your phone.

Step 2: while holding the "volume down" key, press the power button.

Step 3: The phone should boot up to the HTC screen and then jump to a menu. One of the options in this menu is "Restore" and it tells you that you can select this option by pressing the "Home" key. Press your phone's home key and you will boot into the Nandroid system.
Restore

Making a Nandroid backup

If you have Build: RA-heroc-v1.2.3 (which you should if you followed my "Backups and Recoveries Using Nandroid" post) then your Nandroid menu will look like this:

- Reboot system now
- Nandroid v2.2 backup
- Nandroid v2.2 restore
- Apply sdcard:update.zip
- Apply sdcard:choose zip
- Wipe data/factory reset
- Wipe SD:ext partition
- Wipe SD:dalvik-cache
- Part SD:fat32+ext2+swap
- Part SD:only fat32
- Repair ext filesystem
- Convert ext2 to ext3
- Fix apk uid mismatches
- Fix rotate
- USB Mass storage on
- USB Mass storage off

To make a back up of your phone's current state (which I highly recommend you do), use your trackball to navigate down 1 position to "Nandroid v2.2 backup" and click it with your trackball.

The phone should prompt you as follows:

Create Nandroid backup?
Press HOME to confirm,
any other key to abort.

Press your HOME key and your phone will make a backup of its current state and then drop you back at the Nandroid menu. Once you are there, just click Reboot system now to reboot into your phone as phone.

Now you have a back up of your phone's current state (or its state at the time of backup).

If you need to restore your phone to the state in which it existed at the time of backup, just re-enter the Nandroid interface and select -Nandroid v2.2 restore.

You will be prompted to confirm that you wish to restore the phone to the most recent backup. When you confirm this, your phone will revert and you will be back where you were when you made your last backup.

Now we know how to make backups and do system restores using Nandroid.

Backups and Recoveries: Using Nandroid

Because we rooted our HTC Hero for Sprint using the unrevoked method, we still have not made it possible to use Nandroid to make backups, run recoveries, and install custom ROMs. If you want to run a custom ROM, you'll need to be able to use Nandroid and so, you'll want to read through this post.

Please Note: If you haven't rooted your HTC Hero for Sprint yet, you'll want to read my Rooting Option 1 post. The following is only possible with a rooted phone.

So, we want to be able to use Nandroid. Nandroid is something like a BIOS and you'll need it to change boot settings, wipe your device, load ROMs, do backups, restores, etc.

How to's:

Step 1: Plug your rooted HTC Hero for Sprint into the computer that you put the Android SDK on and set it to "Disc Drive" (Don't have the android SDK? Read my "What You'll Need" post to get it.) Make sure you turn USB Debugging ON (on your phone: Home-> Menu-> Settings-> Applications-> Development-> USB debugging.)

Step 2: Download the android recovery-RA-heroc image here and save it to your phone's sim card at the root directory. In other words, save it to the sim card but don't put it in any folders. It should be in the main directory along with all your other folders.

Now we're really going to start hacking at your phone. Remember that you are doing this at your own risk.

All computer command line calls will be in blue, bold, and italics.

Step 3: On you computer, launch your command prompt (terminal for linux users and I don't really care what it is for apple people). If you don't know how to launch a command prompt, just go to the "start button" and run "cmd" (for XP users) or just type "cmd" in the search field for Vista/Win 7 users.

Step 4: Now we want to change directories so that we are hanging around our Android SDK tools. In your command prompt type: cd C:\...\android-sdk-windows\tools
and hit "Enter". The "..." is whatever path leads to your android sdk folder. If this is new to you or you don't understand this, I highly recommend you stop now and enjoy your rooted phone as it is.

Your command prompt should now read: C:\...\android-sdk-windows\tools>_

Step 5: We now want to launch some shell code but first we want to confirm that our SDK tools see your phone. In your command prompt, type: adb devices
and hit Enter
You should see a List of attached devices and your device's serial number.

Step 6: We launch our shell: adb shell
and hit Enter

You should now see a $ and a cursor

Step 7: We switch to root user: su
and hit Enter

You should now see a # and a cursor. Note: if you don't see a #, look at your phone and see if it is prompting you to give any permissions. If it is, allow.

Step 8: Now we want to flash the recovery image that we put on the sdcard back in Step 2. To do this, we're going to envoke some root power after we hop onto our phone's microSD care: cd sdcard
and hit Enter

You should now see a #

Step 9: A good way to make sure that we are in the right place is to list the directories and files where we are. We'll do that my calling for a list: ls
and hit Enter

Command Prompt should list the local directories and files for the sdcard root folder. You should see "recovery-RA-heroc-v1.2.3.img" among them. If not, go back to Step 2 and be sure that you've placed this image on your phone's sdcard.

Step 10: We are now going to flash this recovery image in order to create our Nandroid directory: flash_recovery recovery-RA-heroc-v1.2.3.img
and hit Enter

Nothing too exciting will happen. Command prompt might return this call in text form and then should just leave you again with a # awaiting your next command.

Step 11: Now, we will are going to visit our newly created nandroid folder by forcing our phone to boot into it: reboot recovery
and hit Enter

Your phone will reboot into the nandroid interface. From here you will be able to make backups of your phone, restore your phone from these backups, wipe system data and, most importantly, install custom ROMs. I will cover all of this in a later post.

If any of this didn't work, please let me know in the comments field or, if you know me, let me on Facebook or something.

Rooting Option 1:

WARNING: by rooting your phone, you are choosing to void your phone's warranty. Proceed at your own risk. Know that you are choosing to do this. No one is making you. Further, you are the one doing this, not me.

Ok, so now that we have successfully migrated to build 2.27.651.5 our HTC Hero for Sprint is "vulnerable" to rooting. The rooting option that we will explore in this post is the "unrevoked" option. This is, by far, the easiest option for rooting the phone. I will explore a more "hands on" or traditional exploit in a later post for anyone who is interested in how to exploit 2.27.651.5's vulnerability from the command line.

For now, let's root our HTC Hero using the unrevoked method.

IMPORTANT NOTE: if you have not already migrated to build 2.27.651.5 or have no idea what I'm talking about, click here. You will NOT be able to root your phone using this method if you have not reverted to 2.27.651.5.

If you know that you are running 2.27.651.5 then move on to Step 1.

Step 1: Plug your phone into your computer using your USB cable.

Step 2: Set your phone to "Charge Only".

Step 3: On your phone, navigate to http://unrevoked.com/m/

Step 4: Tap to download the unrevoked exploit.

Step 5: Once the download is complete, install the unrevoked app.

Step 6: Once the unrevoked app is installed, go to your apps collection and run the unrevoked app.

Step 7: Tap "Start" and let the app exploit your phone's vulnerability.

After Step 7, you should get confirmation that your phone has been rooted.

Step 8: Go to your apps tray. Inside you should find the "Super User" app (Little Ninja with a Gun). Tap this app and you will be asked to set a permission. Approve it and your phone is officially rooted.

While it's true that your phone is rooted and that you can take advantage of apps that require root privileges there are some further steps that you need to take in order to get the most of your rooted HTC Hero.

In the next post, we will look at Nandriod, making backups and restoring backups. Knowing how to work with Nandroid is absolutely essential for loading custom ROMs.

If Software Number > or = 2.27.651.6 Then:

Sprint or HTC or someone patched the vulnerability in the HTC Hero for Sprint that we want to exploit in order to gain root access. Lucky for us, when we read the "What You'll Need" post on this blog, we went and got the "vulnerable" build (2.27.651.5) and, so, will not be bothered by this patch because we are going to "upgrade" our HTC Hero down to a more vulnerable state (vulnerable to rooting that is).

It should also be noted that this is a standard upgrade procedure. When upgrading an android device, the device itself may prompt you to upgrade (which all you have to do is tap accept, or go, or whatever) or you can download the upgrade to a computer and follow the instructions below. The only difference between a standard upgrade and what we will be doing is that with a standard upgrade, you are migrating to a newer software version whereas we want to migrate to an older version. The how-to's, however, do not change.

2.27.651.6 Workaround

Step 1: Plug your phone into your computer using the USB cable that came with it.

Step 2: Set your phone to "Charge Only".

Step 3: On your computer, navigate to the HTC Sprint Hero MR 2.27.651.5.exe that you downloaded (haven't downloaded it? do that now by clicking here: HTC Sprint Hero MR 2.27.651.5.exe).

Step 4: Run HTC Sprint Hero MR 2.27.651.5.exe and follow the prompts. This piece of software will walk you through "Upgrading" your phone down to the vulnerable build.

Please Note
1) This software will most likely fail to load the "bootloader" (you'll know what I mean when it happens). Just unplug your phone and plug it back in and run the software again.

2) This software will most likely fail somewhere else along the way. Just unplug your phone and plug it back in and run the software again. It WILL work, it simply requires a few shots at it. Do not worry, you are NOT bricking your phone.

3) Once there is success, your phone will reboot. As it's booting, it will run through the normal start up splash screens (HTC, quietly brilliant, Sprint Now Network, etc.) The phone will appear to hang on "NOW" for quite some time; just leave it alone, it will come around and finish up just fine.

Final Note
If you're like me, you might be wondering if your phone will still be able to make and receive calls to your phone number, send texts and do data. It can. My guess is that the phone's radio is matched to the serial number which is, in turn, matched to Sprint's brain. Your phone will work fine for phone duties...

...but is now vulnerable to rooting!

Getting Started

This blog will start by focusing on the basics of rooting an HTC Hero for Sprint (cdma Hero) and then move through to more advanced user option with a rooted phone. For example, we'll take a look at loading a custom ROM (user interfaces created in the development community). I will try to answer questions or comments as they appear, though I'll most likely refer questions to the appropriate forum.